Ahuja AMX-1412 (14 Chanel ) PA Audio Mixer

Description

• Input Channels : Each Channel has separate 1/4” balanced phone jack for Mic and Line & accepts both balanced & unbalanced signals.
• AUX Control : This controls the level of the channel in the final mix to Aux Send output.
• AUX Send & AUX Return : These have been provided for sending the pre-fader output of channels for monitoring or for adding a Special Effects Unit.
• MONO/STEREO Output : Mono output is available from either Left & Right output jacks when the switch is in ‘Mono’ position.
• Each channel has GAIN, BASS, MID, TREBLE, ECHO, PAN and slide LEVEL controls with CLIP LED indicator.
• Echo section provided with Delay, Repeat & Level controls. Tape section for Record & Playback facility.

• Power Requirements	AC: 220-240V 50/60Hz, DC: 24v (2×12V Car Battery)
  MIC INPUT (Impedance/Gain)	2kΩ/62dB
  LINE INPUT (Impedance/Gain)	20kΩ Balanced/42dB, 10kΩ Unbalanced/42dB
  Distortion	< 0.08%
  Frequency Response	30Hz – 20kHz (+0, -1dB)
  Tone Controls	Bass : ±12dB at 100Hz, Mid : ±12dB at 2kHz, Treble : ± 12dB at 10kHz
  OUTPUT	.
  Line Output LO	-10dBm/+2dBm (200mV/1V)
  Line Output HI	0dBm/+17dBm (775mV/5.5V)
  ECHO/Reverb System	Digital Signal Processing
  Signal to Noise Ratio	>70dB (0dBm, 0.775V)
  Dimensions	W633 × H93 × D420 mm
  Weight	9.4kg